17" Wide Heavy Duty Gas Fryer
> Home > Medallion Hotel Ranges > 17" Wide Filler Units > HD17-40F/HD17-50F

HD17-40F, HD17-50F

17" Wide 40lb. Heavy Duty Gas Fryer with storage base.

Standard Features:

  • Stainless steel front and sides STANDARD
  • 6” (152mm) chrome steel adjustable legs
  • Adjustable stainless steel front rail 6-1/16” (154mm) to 7-5/8” (194mm)
  • (HD-17-40F)–35 lb to 45 lb non-rusting, non-magnetic #304 STAINLESS STEEL Fry Pot
  • (HD-17-50F)–45 lb to 55 lb non-rusting, non-magnetic #304 STAINLESS STEEL Fry Pot
  • HD-17-40F–90,000 Btu/hr,
  • HD-17-50F–110,000 Btu/hr
  • Millivolt pilot requires no electrical connection
  • Snap acting mechanical thermostat
  • Large “Cool-Zone” isolates food particles from the frying area.This prevents food particles from carbonizing, contaminating, or clinging to product, thus prolonging the oil life
  • Twin chrome plated fryer baskets for each model
  • 100% safety shut-off
  • Automatic Single Standing Pilot ignition
  • 1-1/4” NPT front manifold
  • Storage base interior is aluminized steel
  • One year limited parts & labor warranty, (USA and Canada only)

Optional Features:

  • Stainless steel back rear panel
  • Stainless steel common front rail up to 68” (1728mm) wide, (NO additional charge)
  • Rear gas connection on select models including “T” connection, 3/4” or 1” NPT
  • End caps and cover (no charge)- Must specify
  • Polyurethane non-marking swivel casters (2) w/front brakes
  • Storage base shelf - aluminized or stainless steel
  • Single deck or Double deck stainless steel Back Guards
  • Stainless steel Fry Pot cover.
  • 10 “ (254 mm), 17” (432mm) 22.375” (568mm) 34.375” (873mm) high stainless steel backguard
  • Stainless steel vertical flue riser, 13” W x 34.375”H, (330mm x 873mm)

Short Form Specifications:
Heavy-Duty “Medallion Series” 17” Range Match Gas Fryer with storage base, Model: HD17-40F or HD17-50F manufactured by American Range. Storage base included with removable hinged door. To have stainless steel front and sides with 6” chrome legs (unless otherwise specified). HD17-40F–35 to 45 lb fat capacity & totaling 90,000 Btu/hr. HD17-50F–45 to 55 lb fat capacity & totaling 110,000 Btu/hr. Each specified unit to be 17” (432mm) wide and 38” (965mm) deep with front rail fully extended. Adjustable front rail maximum of 7-5/8” (194mm). Specify Natural gas (NG) or Liquid Propane gas (LP).UL, CGA, NSF, MEA listed.
Technical Specifications:
Exterior Dimensions
Model # HD17-40F HD17-50F
Width 17”/432mm 17”/432mm
Depth 38”/965mm (Rail out Dim) 38”/965mm (Rail out Dim)
Height w/NSF Legs 36”/914mm 36”/914mm
Height Less NSF Legs 30”/762mm 30”/762mm
Unit Weight (LB/KG) 173/79 193/88
INPUT-BTU/hr (N-Gas) HD17-40F kW Eq. HD17-50F kW Eq.
  90,000 26.37 110,000 32.24

Installation Notes:
Combustible Wall Clearances
Sides: 6" (152mm)
Back: 6" (152mm)
For reduced clearances, refer to ANSI Z223.1/NFPA #54 and CAN/CGA B149.

Entry Clearance:
Crated: 22-1/4" (565mm)
Uncrated: 17-1/4" (438mm)

Manifold Pressure:
Natural 6 W.C. (15 mbar)
Propane 10 W.C. (25 mbar)
NOTE: Data applies only to North America.

Please specify gas type when ordering.

  

Gas Input Ratings shown here are for installations up to 2,000 ft (610m) above sea level. Specify altitudes over 2,000 ft.

Commercial cooking equipment requires and adequate ventilation system. For additional information, refer to to the National Fire Protection Associations standard NFPA96 Vapor Removal from Cooking Equipment (For North America only).

Because of continuing product improvement these specifications are subject to change without notice.